You are Here: FAQ ->Dedicated Servers->Linux Root Server->IP Addresses->Article #8


WebHosting 5.0 This article is for 1&1 Linux WebHosting only.


How to set up reverse mapping


1. Log in to the 1&1 Control Panel using your Customer ID OR domain name and your password at: http://admin.1and1.com

If you have only one package, you will land on the Administration page. If you have more than one package, select the Packages tab at the top. Select the package in question to reach its Administration page.

select package image


2. Select IP Address Overview from the Server Administration section.
IP Address Overview

3. Select the IP address and click Reverse Mapping
admin_reverse1

4. Enter the name and click Save.
admin_reverse2

SD2B2C905


Print Article
How useful was this article?
(From 5 = Very Useful to 1 = Not useful at all):
1 2 3 4 5


 © 2008 1&1 Internet Inc - About 1&1 Internet